Ceramic Floor Tiles Clay BA 2-6 Supply and installation of ceramic floor tiles made of clay, R11 (outdoor) and R10 (indoor): site setup, protection, and safety measures including approx. 1.00 lump sum for site setup, approx. 5.00 units additional effort for phased site setup, approx. 200.00 m² dust protection film walls, approx. 5.00 m² zipper door film wall, approx. 500.00 m² protection and safety measures for adjacent building components, approx. 150.00 m protection and safety measures for existing skirting boards; inventory of ceramic tile coverings approx. 20.00 hours; substrate preparations including production and removal of protective film covering floor area approx. 250.00 m², cleaning of concrete and screed surfaces approx. 440.00 m², shot blasting of substrate approx. 20.00 m², preparation of existing screed substrate (small areas, room by room) approx. 10.00 m², milling of substrate approx. 25.00 m², closing of dummy joints/cracks approx. 50.00 m, closing of holes/breakouts approx. 50.00 m², spackling transitions/height offsets approx. 50.00 m², adhesion primer for individual areas from 1-10 m² approx. 100.00 m², rapid cement screed (polymer-modified, bonded, small areas from 1-10 m²) approx. 60.00 m², rapid cement screed (polymer-modified, on insulation, small areas from 1-10 m²) approx. 40.00 m²; for ceramic floor tiles made of clay R11 (outdoor area): removal, cleaning, and temporary storage of existing ceramic floor tiles for reinstallation approx. 250.00 m², strip-wise approx. 100.00 m, piece-wise approx. 50.00 units; disposal of damaged existing ceramic tiles approx. 100.00 m², removal and disposal of damaged tiles approx. 30.00 units; removal and disposal of clinker paving stone flooring including sub-base and waterproofing approx. 100.00 m²; facade connection, XPS insulation as drag strip approx. 250.00 m; demolition and disposal of sloped screed under ceramic tiles approx. 70.00 m²; application of primer (synthetic resin dispersion) approx. 420.00 m²; application of adhesion slurry (cement slurry) approx. 200.00 m, strip-wise (width approx. 200 mm) approx. 100.00 m; surface waterproofing of floor slab (MDS, crack-bridging, 2mm thickness, trowel application) approx. 70.00 m²; drainage mat for floor areas (8 mm thickness) approx. 70.00 m²; drainage mortar for sloped floor slab (average thickness approx. 75 mm) approx. 70.00 m²; supply of ceramic floor tiles made of clay (red/brown, R11, weather-resistant, frost-proof, trafficable) approx. 500.00 m²; installation of ceramic floor tiles made of clay (red/brown, R11, half-bond) approx. 500.00 m², strip-wise approx. 100.00 m, piece-wise approx. 60.00 units; grouting of ceramic floor tiles made of clay (grey grout color) approx. 500.00 m², strip-wise approx. 100.00 m, piece-wise approx. 60.00 units; edge, connection, and expansion joints with backer rod including primer approx. 140.00 m, elastic sealant approx. 140.00 m; edge and connection joints (basalt chippings, width approx. 20 mm, depth approx. 50 mm, outdoor) approx. 100.00 m; facade channel as drainage channel with cover and base (width 100 mm, height 75 mm) approx. 50.00 m; drainage mat for floor areas approx. 350.00 m²; drainage mortar for floor areas approx. 350 m²; liquid waterproofing approx. 150.00 m; for ceramic floor tiles made of clay R10 (indoor area): removal, cleaning, and temporary storage of existing ceramic floor tiles for reinstallation approx. 25 m², strip-wise approx. 135.00 m, piece-wise (outdoor) approx. 35.00 units; removal and disposal of damaged tiles approx. 25.00 units; partial demolition and disposal of screed strip-wise approx. 130.00 m; partial demolition and disposal of perlite fill strip-wise approx. 130.00 m; edge insulation strips (mineral wool, 10 mm thickness, 120 mm height) approx. 130.00 m; thermal insulation (mineral wool, 40 mm thickness, strip-wise) approx. 130.00 m; PE film strip-wise approx. 130.00 m; rapid cement screed (polymer-modified, strip-wise) approx. 130.00 m; supply of ceramic floor tiles made of clay (red/brown, R10) approx. 90.00 m²; installation of ceramic floor tiles made of clay (red/brown, R10, half-bond) approx. 90.00 m², strip-wise approx. 150.00 m, piece-wise approx. 55.00 units; grouting of ceramic floor tiles made of clay (grey grout color) approx. 90.00 m², strip-wise approx. 150.00 m, piece-wise approx. 45.00 units; edge, connection, and expansion joints with backer rod including primer approx. 210.00 m, elastic sealant approx. 210.00 m; connection joints for existing transitions with elastic sealant and expansion dowels approx. 130.00 m; drilling out and closing embedded pipe sleeves (25 mm diameter) approx. 200.00 units; further items as per the tender documents.
Technische Universität Darmstadt
· Darmstadt