Modernization of Public Lighting in Orosháza District

Modernization of public lighting systems in Orosháza district: The luminaires must have an installation and maintenance manual, an EU declaration of conformity issued by the manufacturer, and MVM approval. Installation without written approval from the network operator is not permitted. The nominal supply voltage range must include 220-240V at 50Hz. The affected population must be informed about the start of work and the expected duration of power outages, and institutions must be notified. Execution must minimize damage to vegetation. During network construction along roads, speed limit signs must be placed in the affected work area to ensure traffic flow and work safety. Existing low-current networks below and/or above the affected network must be considered, and their operators must be notified. 3x2.5 CELPACK end caps must be installed on the connecting cables of the luminaires. All current connections of the overhead line network must be replaced: 2x2.5+50/25-95 combined for the neutral conductor, and 2.5-4/25-95 for the phase conductor. For new luminaires, black, UV-resistant NYY 3x2.5 mm2 cable must always be used. Detailed task descriptions and quantities are contained in the Technical Documentation. Equivalent products are permissible.

Tender documents

Lots (7)

• LOT-0001Teilweise Sanierung der öffentlichen Beleuchtung in Orosháza
• LOT-0002Teilweise Sanierung der öffentlichen Beleuchtung in Békéssámson
• LOT-0003Teilweise Sanierung der öffentlichen Beleuchtung in Csanádapáca
• LOT-0004Teilweise Sanierung der öffentlichen Beleuchtung in Gádoros
• LOT-0005Teilweise Sanierung der öffentlichen Beleuchtung in Nagyszénás
• LOT-0006Teilweise Sanierung der öffentlichen Beleuchtung in Pusztaföldvár
• LOT-0007Teilweise Sanierung der öffentlichen Beleuchtung in Tótkomlós

Additional details