Delivery of two mobile elevating work platforms

Delivery of two mobile elevating work platforms: Diesel engine according to the latest emission standard, HVO 100 capable, power min. 90 kW - 120 kW, permissible total weight approx. 5,400 to 5,500 kg, minimum chassis payload 3,000 kg, winter tires with Alpine symbol, manual transmission, transmission lock with engaged power take-off, stabilizer on axle 1 and axle 2, reinforced suspension on axle 1 and axle 2, drive via axle 2, disc brakes on axle 1 and axle 2, wheelbase from 3,400 mm to max. 3,750 mm, vehicle width (without mirrors) max. 2,100 mm, cab height max. 3,500 mm, chassis frame for body mounting max. 800 mm high, driver and passenger airbag, adjustable steering wheel in tilt and height, driver's seat in swing seat design including armrest, passenger double bench seat with storage compartment under the seat, 3-point automatic seat belts on all seats including belt tensioners for driver and passenger bench seat, adjustable headrests on all seats, seat covers on all seats, 2 doors, electric window lifters left and right, power steering, radio system with Bluetooth hands-free kit, storage for e.g. loading documents, cab air conditioning, programmable auxiliary hot water heater for cab and engine cooling circuit, heated and electrically adjustable rearview mirrors left and right, central locking, sun visor for driver and passenger, grab handles for entry on driver and passenger side, cab with non-slip rubber floor, cab paint finish: municipal orange, similar to RAL 2011, ABS, ESP, ASR, brake assist, distance warning system, turn assist, fire extinguisher, 2 rotating beacons, reversing camera, vehicle without EC control device, configurable special module for controlling vehicle and body functions. Elevating work platform: total vehicle height max. 3,500 mm, total vehicle length max. 8,000 mm, vehicle width max. 2,400 mm, galvanized cab protection roof, working height min. 25,500 mm, lifting height min. 23,500 mm, hydraulic drive via power take-off of the drive motor, material of the elevating work platform must meet the following material properties: tensile strength Rm min. 1000 N/mm² and yield strength Rp 0.2 min. 900 N/mm², outreach at 100 kg basket load min. 17,000 mm, max. lateral outreach at 100 kg basket load min. 16,000 mm, turntable slewing range min. 360° or 2 x 180°, working area without rear outriggers min. 8,000 mm, hour meter, LED rotating beacons left and right on the tower with impact-resistant light cover and protective cage, protection class IP 67 or higher, mounting of an LED beacon at the rear, all-round storage with flat side wall in the remaining space between material cabinet and slewing tower, material cabinet, controls on the vehicle and in the basket, outriggers with movable support plates to ensure stability, outrigger arms to be equipped with all-round safety marking according to DIN 30710 and warning flashlights, setup inclination max. 5°, load distribution plates with handle approx. 500 x 500 x 60 mm, holder for load distribution plates left and right on the vehicle, basket in aluminum design, size of the work platform approx. 1,400 mm x 700 mm, basket load min. 240 kg, rotation angle of the basket arm min. 180°, basket rotation device 2 x 90°, control panel with display and plain text display of operational information and messages, emergency stop button in the platform and the emergency control, emergency control with plain text display in German on the vehicle for all movements including automatic retraction, automatic locking of all functions after emergency stop activation until manual release, solenoid valves must be accessible from the ground and laterally (if technically feasible), hand pump for emergency operation on the vehicle (must also function when emergency stop is activated), battery control in platform operation with warning signal when critical on-board voltage is reached, engine start/stop system in the platform and on the emergency control with start blocking when gear is engaged, automatic retraction including outriggers, automatic setup/leveling system with operator control (e.g., via spirit level) to ensure horizontal setup, built-in load moment limitation, electrical proportional control on the work platform for all movements including outriggers, control system designed so that lifting of the platform is only possible with extended outriggers, at least 10 BASt-approved pylons (approx. 500 mm high, fully retroreflective) and corresponding holding devices, tower construction designed to ensure that when the work basket is laterally aligned, the tower on the opposite side of the vehicle does not protrude beyond the mirror width, surface corrosion protection below the aluminum cover with a paint preservative against atmospheric and environmental influences, body expertise from an official monitoring organization to allow registration of the complete vehicle, drive of the work platform body without using the drive motor (engine off), charged battery system (min. 12 kWh) must be able to ensure continuous operation of the elevating functions for min. 3h, charging via 230V connection (Schuko connection). A customer service workshop or a service point with mobile service is required to ensure that repair of the elevating work platform can begin within 24h. Legal warranty 24 months, additional warranty periods beyond the legal warranty period are desired and to be specified.

Tender documents

Additional details